Products
The precise temperature control of Peltier modules are the core of electronic devices. They integrate transistors and algorithms, support data processing and AI computing, adapt to scenarios such as 5G, the Internet of Things, and autonomous driving, and have the advantages of low power consumption and high computing power. They promote the intelligent upgrading of industrial automation and consumer electronics and serve as a key hardware foundation for the development of the digital economy.
Our products
Our products are high-quality Peltier modules, featuring excellent thermoelectric conversion efficiency and stable operation even under complex working conditions. We offer customized development solutions, paired with full-process support from our professional technical team, to comprehensively meet our customers’ temperature control requirements.
Air to Air Peltier assembly module
The ID-110-24-AA is a standard Thermoelectric Assembly in Zicotec that heat dissipation is forced air on both sides. It provides active thermal solution to cooling objects. The hot side uses one high performance heat sink with brand name fan to realize lower thermal resistance, The heat exchange on cold side is thru high density heat sink and brand name fan. The brand name thermoelectric modules are custom designed to achieve a high coefficient of performance to minimize power consumption. Custom configurations and moisture protection options are available.
PRODUCT SPECIFICATIONS
Specifications | |
Production application | Indoor |
Cooling power Max (w) * | 113w, @ 35°C, dT=0°C |
Operation Voltage (VDC) | 24VDC (Max 26.4VDC) |
TEM Current (A) | Normal 5.1A, Initial 5.7A |
Fan Rated Current (A) | Hot: 0.4A, Cold: 0.4A |
Total power consumption (w)* | 141.1w, (TEM: 121.9w, Fan: 19.2w) |
COP * | >0.8, (dT = 0°C) |
TEM Resistance (Ω, ±10%, 23°C) | 3.06-3.40-3.74 |
Performance Tolerance (±%) | ±10% |
Hold side thermal dissipated | Force convection by Axial fan |
Cold side thermal dissipated | Force convection by Axial fan |
Over temperature (hot side) | 75°C |
Operation temperature range | -10°C to 55°C |
IP Level | NA |
Fan MTBF | 70,000hours @40°C, 65%RH |
Noise level | <55dB(A) |
Certification Compliance | RoHS |
Weight (kg) | 4.2 |
Notes:
-“ * “ Based on operation voltage 24VDC.
-The above performance of unit is depended on Zicotec technology design and Lab test result.
THERMAL DESIGN
Thermal design simulation is beneficial to the design and development of Thermoelectric cooling unit. It helps engineer to work out a Thermoelectric Assembly in a short time.
The boundary conditions in solution as below,
A standard cabinet 50L with 30mm insulator, the ambient temperature in 35°C, the operation voltage 24VDC. A dummy heater generated 110w inside the cabinet. The simulation result requires thermoelectric cooling unit to maintain 35°C inside the cabinet.
Testing &Lab
Thermoelectric Assembly can be validated by real cooling performance testing. We used a standard enclosure for Air to Air series, a Standard dummy heater for Air to Direct series and Air to Liquid.
Installation Requirement
Safety & Warning
1.Assemble the unit properly and mount the unit in vertical direction to make sure the condensation water that can flow out from heat sink fins.
2.Don’t input incorrect voltage to the unit.
3.Handle the unit carefully to avoid damage and hurt by the falling out.